How can you reduce or reduce the noise of servo press machines?

Servo press fitting machine is a multifunctional intelligent hydraulic machine tool that is suitable for a wide range of industries and has high press fitting accuracy. It is used for press fitting of shaft parts, shaft sleeves, motor stators, and other parts, and can also complete actions such as pressing and shaping. The structure of the executing components is simple and has the characteristic of flexible layout. According to the process requirements, they are arranged in multiple directions (vertical, horizontal, inclined at a certain angle, etc.) and distributed in multiple locations. During the use of intelligent servo press machines, there may be a lot of noise caused by the equipment itself or external factors. For example, noise caused by vibration.

Introduce several methods to reduce the noise of servo press machines:
1. The noise of the motor link can be reduced by using elastic couplings to reduce vibration, and using low noise motors to reduce noise
2. Set up anti vibration rubber pads;
3. Replace the pressure fitting machine pipeline with a hydraulic manifold block
4. The vibration caused by pressure pulsation can be achieved by using accumulators and hydraulic hoses. Accumulators can absorb noise below 10Hz, and hydraulic hoses can reduce high-frequency noise
5. Hydraulic pumps use soundproof covers
6. A venting device should be installed in the system.
Effectively reducing and reducing noise and vibration is one of the key points for maintaining CNC press machines. The above points can effectively improve work efficiency and extend the service life of intelligent servo press machines.